Skip to content
07888 526686

Fully insured Free quotes 20+ years experience

Instagram
London Marble Stone

Wood floor restoration · London

Wood Floor Sanding & Refinishing in London

Bring warmth and an even, cared-for finish back to tired wooden floors with sanding and refinishing. We combine suitable repairs, careful preparation and your choice of finish, with the floor's condition checked before the scope is agreed.

Prefer to talk? 07888 526686
Refinished oak floorboards beside tall sash windows and a pale fireplace
A natural oak finish with the grain and original board layout still visible.

Is sanding the right treatment for your floor?

Hyper Grinder I-4 WOOD parquet sander with dust extraction on solid oak boards
Wood sanding equipment with extraction, shown on a suitable oak floor.

A full sand is an option when the existing finish is badly worn, the timber needs preparation or you want a different colour. It starts with checking the floor itself: its construction, remaining usable timber, previous sanding and any movement or moisture-related damage. If the surface only needs lighter maintenance, we will discuss that route too.

Agree the repairs before choosing the finish

A specialist fitting a small oak repair piece beside a period doorway
A local repair can retain sound surrounding timber where the floor is suitable.

Loose boards, damaged edges and visible gaps need attention before the final surface is prepared. Your quotation should make clear which repairs are included and where a replacement board or a separate investigation may be needed. Repairs can blend into an older floor, but new and original timber may still differ in grain, age and colour.

A closer look at the finish

Explore the change in appearance

Refinished oak floorboards beside tall sash windows and a pale fireplace
Illustrative worn condition: heavy grey traffic wear across the centre
BeforeAfter
Illustrative restoration example — actual results depend on the floor.

Choose the colour and sheen in your own room

Three oak samples showing natural matt, honey satin and darker stained finishes
Compare colour and sheen on sample timber in the room’s own daylight.

A pale natural look, a warmer tone and a darker stain can change the atmosphere of the same room. We discuss the finish alongside how you use the space and how you want to maintain it. For a colour change, a sample on suitable timber gives a more useful starting point than choosing from a screen alone.

A clear sequence from preparation to handover

Hyper Grinder I-4 WOOD preparing original pine floorboards in a period room
A finishing pass on original boards; the method depends on the assessed floor.

We assess the floor, agree the scope, plan protection and access, complete suitable repairs, prepare the surface and apply the agreed finishing system. Edges and adjoining surfaces are part of the planning, not an afterthought. You receive guidance on using and caring for the floor so that the final stage is as clear as the quotation.

Plan furniture, access and drying time

A specialist applying a thin protective finishing coat along oak floorboards
The finishing system and return-to-use guidance are agreed for the individual floor.

Tell us whether the property is occupied, which rooms connect and whether there is an alternative route through the home. Furniture arrangements and any building restrictions need agreeing before work starts. Dry enough for limited use does not always mean fully cured: the schedule for furniture, rugs and cleaning depends on the selected finish and conditions.

What affects the cost of floor sanding?

Illustrative worn condition: heavy grey traffic wear across the centre
Illustrative earlier condition showing wear and damage on the same timber floor.

The floor area is only part of the price. Room shape, edges, old coatings, repairs, the chosen finish and access can all change the work involved. Send your postcode, an approximate area and a few clear photos for an initial discussion. Where the condition cannot be assessed remotely, a site visit can establish a reliable scope before a final quote.

Before you decide

Your questions, answered

Every floor is different. If your question is about a particular mark, board or finish, send us a photograph.

Can all wooden floors be sanded?

No. The floor needs enough suitable timber and a stable condition. Some engineered or veneer products are unsuitable for a full sand. If you do not know your floor type, send an overall photo and any product details you have; we can advise what needs checking.

Will sanding remove every scratch or dark stain?

It can improve many surface defects, but deep marks, staining within the timber and earlier repairs may remain visible. We assess the likely result and discuss local repairs or replacement where appropriate before you commit to the work.

Is floor sanding completely dust-free?

Sanding produces dust. Ask us about the dust-control and protection arrangements proposed for your property, including adjoining rooms and belongings. We will agree the practical preparation required rather than promise that no dust can occur.

Can you quote from photographs?

Photos and an approximate area help us understand the job and discuss the likely scope. A firm quotation may require a site assessment, especially where the floor construction, previous sanding or extent of repairs is uncertain.

Free site assessment

Find out what your floor needs

Send a wide photo of the room, a close-up of the worn areas and your postcode. Tell us the finish you like and we will help you plan the next step.

By sending this form you agree that we may contact you about this enquiry. See our privacy policy.

Prefer to send photos? Message us on WhatsApp or call 07888 526686.